The Sunnen HTC computer controlled honing machine enables continuous stock removal, keeping the operation running at peak efficiency.
The graphical display indicates high and low areas in the bore enabling the operator to make adjustments in manual mode to correct any differences, or switch to automatic bore correction in which the computer will take full control.
FEATURES INCLUDE
- The Sunnen HTC 5002 is capable of honing from 50mm to 1000mm diameter, and 5 meters in length, in one pass. (10 metres in length, if you end for end the work piece)
- Special mode to automatically correct bore geometry errors, tight spots, tapers etc.
- Optimum surface finishes are achieved every time.
- Improved efficiency due to greater material removal rates – resulting in cost savings.
- In-house digital surface finish measure with print out.